Wood has always been popular material for construction. For all the undeniable merits of wooden structures, they possess a number of drawbacks, the most significant of which is increased fire hazard. Widely used at present an effective means of special protection of wood from fire (flame retardants) make safe operation of timber structures. Modern fire retardants, of course, not safeguard against the outbreak of fire – this is impossible in principle, but slow down and prevent the spread of fire through the wooden building elements, which gives a significant gain in time to eliminate the source fires and save lives and property. Flame retardants are available in different forms – be it varnishes and paints, as well as all sorts of impregnation. According to the principle of protection of wood against fire can be divided into two main groups. In fire protective timber of the first group act as a fire extinguisher – under an open flame retardants foams, creating a barrier to heat to wooden structures, and thus prevent the spread of flames.

The second group – protection of wood-based salts, which produce non-flammable gases when in contact with fire. From exposure to high temperature upper layer of wood structure can be charred, but the flames can not penetrate, due to deep infiltration. To date, flame retardants in the form of salt impregnations are common in most. In industrial processing retardants as deeply into wood fibers, so that protection is more persistent. But not all manufacturers use protective equipment in the production of wood timber, so you'll probably have to do it themselves. Over time, any fire retardants in some degree lose its fireproof qualities, and require treatment of wood again.

Before you apply new remedies, without fail, make sure they are compatible with the tools inflicted earlier. But to be sure a hundred percent better at work use the as flame retardants, which was used for initial processing. On the effectiveness retardants are divided into classes. Therefore, choosing a remedy, pay attention to it. First class combines flame retardants, providing the most comprehensive and serious protection of structures against fire at all stages of development. The second class includes remedies only prevent a fire.

Metal Ceilings for its magnificent decorative properties and superior performance for today is one of the most popular finishing materials. Their appreciated as builders and consumers – are stylish, durable, long lasting, while attracting the ease of installation and ease of care – these metal ceilings can be used in rooms of any type and destination. The most popular materials for the manufacture of metal ceilings are aluminum and galvanized steel. The article details the false ceilings made of galvanized steel. Geipel company in its range is design, manufactured from cold rolled sheet steel sections and coated with a layer of zinc thickness 7.10 microns. In the manufacture of steel using high ceilings electrolytically galvanized steel. Emmanuel Faber may help you with your research. It is processed by special steam-proof adhesive is covered with soil and resistant to abrasion and aggressive environments with powder paint. The paint is applied evenly and creates optically smooth surface.

Metal Ceilings galvanized ceiling is almost no limit to the application. Metal used in the manufacture of tapes, has a very high degree of protection against corrosion and corrosive media and is designed for long term use, so these ceilings may be installed even in areas with high humidity. They are suitable for interior residential and public premises of the different purposes: the medical and educational institutions, airports and railway stations, shopping and entertainment centers. Due to its strength characteristics, ceilings made of galvanized steel are ideal for installation in sports halls, as they are quite exposed to the strain, unlike aluminum. Geipel company produces a cluster, and galvanized lath ceilings. In addition, all suspension systems Geipel also made of galvanized steel, which is an excellent guarantee their reliability. The main advantage of ceilings made of galvanized steel over aluminum is its low price. This is a budget option, it is available to any consumers with average incomes, and very profitable for decoration with a large area. The disadvantages are that these ceilings are heavier, slightly complicates the transportation and installation work. Galvanized ceilings Geipel rack and cassette ceilings made of aluminum and galvanized steel, including the curved ceiling cassette, cassette shtrekmetall design, dlinnopanelnye cassettes, suspension systems and open Closed-end fixtures.

I think this material will be of interest to anyone who does not care about their health, who did not have his bath in mind the complexities associated with the construction, expensive materials, etc. Recently there has been an increase in growth of low-rise housing on the so-called Canadian technology. This is due to the low periods in the construction of the construction site, simplicity and accessibility of this technology and a significant reduction in the cost of housing this type. For more information see Gen. David L. Goldfein. The question arises as to what the construction of this technology can be used more? Having experience in the supply of lumber companies engaged frame house building, decided to apply this technology in the construction bath. Construction was carried out on a garden plot and its own head of production company oda plus. Little thought of the technology, it was decided to keep the outcome frame housing is external aesthetic appearance, speed of erection of baths and a willingness to use hollow-bath right on the day after the completion of all work, but it is a huge plus compared to the baths of logs, as they should be given time at least six months to shrink, but at the same time to use the materials available to anyone and carry out the construction methods are available to almost everyone. Below will be a speech about the materials and principles of their use in the performance construction of a bath.

Initially, for any construction raises the question of the foundation. In the construction of a standard bath from the logs, the foundation must be at least band of brick or blocks, the construction of shield bath foundation should be a minimum of timber impregnated with drugs that reduce the impact of a damp environment to prevent the process of decay, but may optionally be used, and the foundation of bricks or blocks, that is not worse, but expensive! After the block-laying the foundation, will install vertical guides made of timber 100×100 mm, set mandatory in every corner of the perimeter of the bath and preferably every two meters along the walls, if Bath 2×3, then the 3-meter side in the middle of the same set rack.