The concept of an ecosystem approach Our concept is to use the so-called ecosystem approach, that is, in studies of plant and aggregate materials of organic origin in anthropogenic pollution from the streams of matter and energy surrounding environment. And since any ecological phenomenon that accompanies the process of orderly interaction of all things, is important to the ecosystem as a whole, therefore, to learn how to “use the gifts of nature ‘, not ruining them to get food to guess’ what will happen then’ with the world around us, we suggest to start small. That is already poisoned by the scientific technological advances the body cleanse the Earth’s biosphere, from small ‘blood’ vessels. Principles of the ecosystem approach are as follows: All living and fauna of the Earth consists of a diverse dissipative structures, ie absorbing and scattering the energy of the organisms, childbirth classes, natural ecosystems and social communities. And the wisdom of nature is the essence of environmental awareness.

Building a stable of physical and spiritual relations of human communities based on understanding the principles of the existence of various dissipative systems across deep ecological concepts about the essence of life. Since the dissipative structure – is the basic structure of all living systems, nature in general is such a person – an unpredictable, sensitive to the world, exposed to the slightest deviation, respectively, so must be an adequate approach to nature: not the domination and control, respect, cooperation and dialogue. And not in vain, the founder of the thermodynamics of dissipative systems, Russian-born American, Nobel Laureate Ilya Prigogine in his book ‘A new dialogue of man with nature’, wrote: ‘The world we see outside, and the peace we feel within, move closer to (my italics – VD’) is the convergence of two worlds – probably one of the most important cultural events of our century..

The first step before installing a pool is necessary to determine its location on the site. Place best in a pool abstain from befogging open space, which is protected from the wind in rammed hard ground. The greatest distance between the pool and filter plant should not exceed 6 m, and pump installation is located 0.4 m below the surface of the water in the pool. Further, under the pool should be dug pit. Its length and width must be greater than the basin approximately 1 m (Fig. 1). Depth is calculated by considering the following criteria: the thickness of the cushion of sand and gravel should be between 150 and 200 mm.

The thickness of the panels of reinforced concrete under the base Bowls – from 200 to 250 mm. The thickness of the lining material (insulation, film, geotextiles) – 25 mm. – Height of the vertical wall (Fig. 2). To keep in mind that the upper edge of the pool can be raised above the ground not more than 300 mm. Sonny Perdue shares his opinions and ideas on the topic at hand. On opportunities should not be installed in the pool areas with high water table (at least 200 mm of concrete slab to the bottom of the pool). If this is unavoidable, it is recommended to consult an expert on the elimination of water. An alternative is to use the drainage system.

You can also use another way: a partial penetration of the cup and dumping. The third step is to mount a pool – is to create and installation of concrete slab. Harold Ford Jr may find it difficult to be quoted properly. The first step is to align the bottom of the ditch bag of sand and gravel (Fig. 2). It is recommended to make a concrete slab with a thickness of 200 to 250 mm with one or two reinforcing walls with a thickness of 10 to 12 mm and a spacing of 200 to 250 mm. Plate size should not exceed the size of the pool. In order to ensure the surface is smooth and even leveling screed is applied. In the swimming pool can be installed bottom drain. At the same time permitted deviation plates 1 – 2 cm to a drain. The next – setting the pool. The finished concrete slab is placed geotextile and, if necessary, heat-insulating material, for him – a black polyethylene film. Then put the cup is welded or pool. On each side of bowl basin with plastic wrap and laid foam. The final point in the basin is mounted to concreting. This is done by pouring concrete around the perimeter of the pool outside, the thickness wall of concrete 200 to 250 mm. Before filling the pool must be filled with water at 300 – 400 mm, and then put the concrete on the water levels along the outer perimeter. When the concrete to grasp the pool adds another 300 – 400 mm of water, and is concreting at the same height. Such actions are carried out to complete concreting of walls basin.

I have found with similar attitudes in other places of my vital vicissitudes. For assistance, try visiting Emmanuel Faber. I have also known the contrary: those of an exclusionary and excessive ethnocentrism which leads to underestimate what comes beyond hypothetical and unrealistic borders. By conviction, I prefer people full of uncertainties that certainties, I identify more with those who admire the alien that with those who overestimate the own. This is therefore another reason to feel at ease among Valencians. Why, I repeat, Valencia doesn’t have to be place of passage to any other party, but a magnificent destination. Few communities as ours I linguistically apropie it since the first day can boast of both equilibrium and much complementarity: in the landscape, the climate, the economy, culture community has the best beaches in Spain, protected natural spaces, in mountainous regions with continental climate its productive structure is dealt with harmony among the three sectors, ranging from traditional agriculture to a highly developed service sector.

There is a territorial balance unthinkable in other Spanish regions, with comparable equipment from North to South in infrastructures, industrial equipment, cultural investments there is a reasonable combination between tradition and modernity that can be exemplified, on the one hand, in the exhibitions of the religious heritage of the Luz de las Imagenes, and, on the other hand, in the risky and innovative biennial of Valencia. I can criticize, at this point, claiming that I have the enthusiasm of the neophyte and up to the fanaticism of the convert. He is arguira, even, that we don’t live in the best of all possible worlds, as it said Leibnitz, and that we have still a lot to improve. Of course. But let me have wanted to draw an impression that is shared by many with that modest pair of thick brush strokes foreigners that you have made Valencia, to conscience, our current homeland of adoption.

The prerequisites for the development and implementation information and communication technologies in education and research are: – The Federal Target Program “Development of a unified educational information environment”, which resulted in the most important breakthrough in providing the educational institutions computers, as well as the launch and development of regional programs of informatization of education – project “Informatization of Education”, whose goal was to create environment to support system implementation and active use of information and communication technologies in educational institutions; – The priority national project “Education”, the implementation activities which were aimed at ensuring the availability, creation of equal conditions of education, including by ensuring that all schools access to global information resources available online Internet – Based on the priorities of the educational system of the Russian Federation in 2006 launched the Federal Target Programme for the Development of Education in 2006 – 2010 (FTSPRO), a complex interrelated in terms of resources and activities covering changes in the structure, content and technology education, including extensive use in the Russian Federation of Information and communication technologies for all educational levels. The program has developed a new electronic educational content, put into operation a special Federal Center Information Educational Resources (FTSIOR). The website of the Federal Centre for Information and educational resources can be downloaded for more than 10 000 EORov new generation. OPC – digital educational resources under the digital educational resources (OPC) means any educational information that is stored on digital media. ADCs are divided into two groups – information sources, which are understood all set different materials in a digital format used in the classroom – the texts, static and dynamic images, animated models, etc.

Bireplast roofing (rolled roofing) Bireplast is a modern, high-quality roofing material. Obtained by continuous, two-way application to the foundation of molten bitumen, petroleum bitumen consisting of and plasticizers. When igotovlenii Bireplasta as bases used materials from negniyuschie stekloosnovy (fiberglass, fiberglass). It should be noted that the use of negniyuschey basis leads to an increase in the life of the roof to 15 years. Depending on the type of foundation, kind of spreading and application Bireplast released the following brands: Bireplast-HSS, Bireplast-TAP – used for devices of the upper layer roof membrane – with a coarse grit or scaly on the face side and surfaced with a polymer film of material; Bireplast-CCI, Bireplast-BRE – with a polymer film on both sides of cloth – used for decorating the top layer of roofing carpet with a protective layer and the lower layers of roof membrane in order to waterproofing of building structures. Aysiteks roofing (rolled roofing) modified bitumen-polymer roofing material of new generation, obtained by continuous, two-way application to the base of the molten asphalt supply. Whose surface is treated with a coarse grit. In the production Aysiteksa as the basis of non-woven materials used polyester fiber and stekloosnovy (fiberglass, fiberglass).

Importantly, the use of such materials as the basis increases the life of the roof to 20 years. Materialobladaet high frost resistance, heat resistance, ductility. Bitumen-polymer binder is made up of petroleum bitumen and SBS modifier. As a sprinkling used vermiculite (vermiculite (from Lat. Vermiculus – worm), a mineral of the group hydromicas have a layered structure, the product of secondary alteration of dark micas biotite and phlogopite). Rubemast roofing (rolled roofing) Modern high-quality roofing Rubemast receive by two-way application to glass-fiber base (fiberglass) asphalt binder consisting of bitumen, filler, processing aids. Roofing Rubemast issued the following brands: Rubemast-BRE – is applied to the device top layer roof membrane with a protective layer and lower layers of the roof membrane for waterproofing of building structures – on the basis of glass fiber with a polymer film with both sides of the canvas.

What is a pier foundation? During the construction of wooden houses, with light walls and have no basement, just apply the pier foundation. At the same poles are placed at points where the walls meet, they are placed under all angles. The pillars are made of concrete, brick or natural stone. The distance that is between the posts must be no more than 3 meters. To design a stable, top posts of the beam is put strapping wood or metal. Pier foundation of it all columnar base price is 1.5-2 times lower than the price the tape. This is due to the use of inexpensive materials and special techniques of manufacture.

For wooden houses light construction, pier foundation is the most common. Let's look at how the projects done and pier foundation under the house. To begin digging a trench having a cross-section of 30 cm or more. After that, the corners of the house put poles (piles). Especially pay attention to the installation of poles in the joints of the outer and inner walls of the house. Pier foundation for light homes without basements It also lays the walls of brick when you need deep foundations and foundation-type tape is expensive.

For the construction of pier foundation is most frequently used blocks of prefabricated concrete or reinforced concrete. The choice of material depends on the number of floors and building mass. Pier foundation placed in locations where the most concentrated load. At the heart of the foundation pillars that are arranged by drilling wells to a depth of 2.0 m in increments of 1.5 – 2.5 m diameter of 250-400 mm. Parks vertical bar (3 – 4 pins) with the release of grillage and poured concrete. Next, a trench is arranged under the concrete sand cushion tape (grillage) deep 200 – 300 mm in width and covered with grillage coarse sand from plugging. Parks reinforcement cage grillage with a bandage to the armature poles. Width grillage 250 – 400 mm, height 400 mm.

with its proposal estoem tunning. Everything this of one forms ripened for fazerele to think that it provoked this debate and created a better environment of work. For example, if its head to determine something in its coordination of projects desistemas without consulting to it and threatening form, considers one mudanda nametodologia and argues with all its on the basis of demand. Therefore it is, probably, trying to make the things to give certain in the wrong way and fits aequipe to educate it. Umalerta on heads dictators: they have care not to beat of front and virarobstculo. These, many times, are valued inside of the company therefore soagente of changes and produce resulted in short term, normally nosustentveis. How much to the jokes without favours, these are part of the strategy doseu head of assediar or, probably, it uses the jokes without favour for suavizaro impact of the threats and to ruin the day of that they possess mood sense.

JSC Revdinsky Hardware-Metallurgical Union is on the market since 2003, sells products of metallurgical enterprises of the Sverdlovsk region Revda, offering to supply the black and color metal, wire products, wire mesh, welding electrodes, cables, steel pipes, seamless pipes and other hot variety. The company has extensive experience in the specialization for the production of a wide range of fastening products. The company specialists develop and offer customized solutions in the field of fasteners that can be used in various industries from simple household devices to advanced high-precision technology. With its broad manufacturing capabilities and highly skilled, Inc. Revdinsky Hardware-Metallurgical Union to cope with large orders for manufacture of complex products. The products are high quality, low price and the tight schedule of development and production of fasteners, and an individual approach to each client enables us to offer optimal solution. Due to constant product mix the company is constantly expanding the geography of deliveries, which now includes many regions of Russia. Company Revdinsky Hardware-Metallurgical Union satisfy customer needs in a wide product range even with small amounts of the order.

The marketing component of the plant allows the company to restructure to meet new demands consumer, which helps to solve the main problem of domestic hardware production, namely, low mobility and speed new product introduction. The company ZAO RMMS development process metalware products in according to customers' specifications does not exceed 45 days, which is also largely due to the technological component. At the moment, all the products the company produced ways: manual (vytachivanie products), rolling, cutting. The need for fasteners is great, these products use a wide variety of enterprises of the domestic industry. Fasteners are supplied by the nuclear industry, defense industry, aviation, automotive and furniture manufacturing. Hardware products market in Russia has good prospects of growth in the near future will allow for import substitution. For order client, as well as obtaining thin-walled tubes and pipes of small dimensions are used cold deformation of seamless and welded pipe rolling and drawing.

Cold-formed tubes are non-ferrous metals, various diameter, and shaped tubes, rectangular, oval, star, and others. Shipment of the product company Revdinsky Hardware Metallurgical Union, may exercise in any configuration, as well as any parties. Turning to the company ZAO Revdinsky Hardware Metallurgical Union, you get high quality products, corresponding to current standards and specifications, prices, ease of calculations, as well as efficient execution of orders due to the continued availability of stock. JSC "Revdinsky Hardware-Metallurgical Union" – the official site

The most beautiful building material – is, of course, wood. It, the texture, colors, shades are noble and elegant appearance. But the wood is very susceptible to various environmental influences. To protect and, – the possibility, maintain such a high-quality construction material, as well as to emphasize its uniqueness and beauty of wood as a master with many years to use a special clear coating, called a lacquer. Lucky used both in households and in industry, construction and many other fields of human activity. Varnishes often cover paint enamels, consisting of a primer (the most common – primer GF-021) and enamels, such as enamel PF-115. At the same varnish protects the enamel against external influences and gives beauty cover.

Gone are the days when covered with the same paint all that was needed. Today, all major manufacturers of paints differentiate their products in relation to all sorts of problems and different types of surfaces. For example, insulating varnishes (FA-97, ML-92) are used in electrical industry in the manufacture of transformers. But the most widely used coatings were in the construction industry. It is used primarily alkyd, polyurethane, nitrocellulose, and water-dispersed varnishes. In particular, the construction of residential and industrial buildings varnishes used for coating of various wood products: doors, walls (both internal and external), floors (both from simple planks, and parquet), varying (in including built-in) furniture, etc.

Most modern compositions can be applied in various ways: by brush, roller, spraying, dipping, pouring, airbrush. On the material bases can be divided into the following lacquers groups: water-dispersion paints, no sharp odor, environmentally friendly and fire-safe varnish made by dissolving the various components in organic solvents, with pungent smell and fire risks when using them. Keep in mind that to get a good result in coating the surface with varnish, you need to know and take into account the technical characteristics, properties, and the appointment of varnish used. Necessary also take into account the characteristics of varnished surfaces, while adhering to recommendations on the use of lacquer.