Special attention today in the domestic market worth facade paints. Indeed, much of the 'front problem' is solved exactly painting. All paint materials for facades, are protective and decorative coatings, ie, they must not only decorate the building, but also reduce the level of destroying its environmental influence. The main types of damaging effects of fronts: the variables temperature (in some areas, diurnal temperature difference reaches 40 C) and humidity variable, including sea fog sunlight (ultraviolet radiation), the wind, biological exposure (mold, fungi and etc.), industrial and environmental pollution, chemical and physical incompatibility of the material of the building and its coverage. Often these factors work together. The most powerful destroyers is, of course, variable temperature in combination with high humidity, air pollution and sunlight. The paint and the painted surface should approach each other, then their 'living together' will be a long and beautiful. Type surface in this alliance – which determines the value.

Mineral surfaces at low temperatures tend to gain moisture, and with an increase in – give it away as a couple. Therefore, the exterior paint to these surfaces must have a structure that does not pass water in the condensed phase, but to release it into gas (vapor), or pairs of tear film of paint. Paints that do not give a building facade to breathe, would provoke the moisture inside, which will lead to destruction of the mineral base. Often the old brick building, plastered thick cement plaster and paint-covered slabodyshaschimi, turn under the plaster in the soft ground. For mineral surfaces such as concrete is acceptable, not all water-based paints, as they 'pull' on the surface of alkali, obesschelachivaya the upper layers of the base. This contributes to the destruction of steel reinforcement, and may also lead to rapid fading of the coating. For wooden surfaces are the most important indicators of flexibility and waterproof paint.

Related posts:

1. Online Tips Wizard invented special formulations: – A thick layer of paint softens, causing a brush on the painted surface of the iodine solution or a paste of a mixture of chalk, asbestos...
2. Using Drywall Drywall is widely used in modern construction, primarily in order to align the walls and ceilings. Also, this building material helps to soundproof the room. Plasterboard has a light weight, can be...
3. Lucky Part Construction The most beautiful building material – is, of course, wood. It, the texture, colors, shades are noble and elegant appearance. But the wood is very susceptible to various environmental influences. To protect...
4. Film Coatings In order to improve the characteristics of lacquers and enamels of air drying, as well as to accelerate curing drying them sometimes carried out at elevated temperatures (40-60 C). Main of lacquers...
5. The Surface Welding steel coated ZINGAmozhno produce without the risk associated with the strength of the weld. Problems associated with porosity, as with paint or hot galvanizing does not arise. If you have read...